Fast facts
| Trade code | 310G |
|---|---|
| Sector | Motive power |
| Classification | Compulsory trade (O. Reg. 876/21, s. 2) |
| Certifying exam | Required (O. Reg. 876/21, s. 3) |
| Apprentice to journeyperson ratio | Not subject to a ratio |
| Red Seal trade | Yes |
| Active apprentices in Ontario | 297 (reported in Ontario's apprenticeship dataset) |
| Approved sponsors | 181 |
| Certifying body | Skilled Trades Ontario |
Last verified against the sources listed below.
Do you need a licence to work as a motorcycle technician in Ontario?
Yes. Motorcycle Technician (310G) is a compulsory trade, so doing the work legally takes a licence. In Ontario that licence is the Certificate of Qualification, usually called a C of Q, issued by Skilled Trades Ontario. While you train, your registered apprenticeship is what lets you work.
How to get your motorcycle technician licence
- Find a sponsor, usually an employer or union, and register as an apprentice.
- Complete the on the job and in school training set by the trade's training standard.
- Pass the certifying exam, the Red Seal exam of 130 multiple-choice questions. Passing it earns your C of Q. You book it in your Skilled Trades Ontario Portal ($150 plus HST) and write it at one of 24 exam centres: how to book it and find the nearest centre.
- Renew the certificate every year to keep working in the trade.
Hiring a motorcycle technician? Anyone can check whether a person holds a valid certificate on the Skilled Trades Ontario Public Register. The steps, hours and exam are explained in detail below, and every compulsory trade is on the list of compulsory trades.
What does a motorcycle technician do?
A Motorcycle Technician repairs, services, overhauls, inspects and tests motorcycles for faults and road worthiness.
Skilled Trades Ontario describes the work of this trade as follows:
- performs diagnosis and repairs motorcycle systems, including: engines and drive lines; fuel systems; charging, starting, ignition, lighting and other electrical systems; cooling systems; chassis and steering systems; front and rear suspensions; braking and anti-lock systems; tires and wheels; sidecars and trikes (three-wheeled motorcycles)
- prepares motorcycles for delivery
- performs safety inspections
- performs scheduled maintenance
How long is the motorcycle technician apprenticeship?
The in-school portion of this apprenticeship runs to 2 levels. Skilled Trades Ontario does not publish a total hour requirement for this trade on its trade page; confirm the current requirement in the trade's apprenticeship training standard before signing an agreement.
What do you study in school for the 310G?
The in-school portion covers, but is not limited to:
- power trains
- braking systems and chassis
- electrical/electronic and fuel systems
- work practices such as workshop practices and procedures, fastening and sealing techniques and welding
Is motorcycle technician a compulsory trade in Ontario?
Yes. Motorcycle Technician is one of the 23 trades classified as compulsory by section 2 of O. Reg. 876/21 under the Building Opportunities in the Skilled Trades Act, 2021. To practice a compulsory trade legally in Ontario, a person must hold a Certificate of Qualification, a Provisional Certificate of Qualification, or a Registered Training Agreement, and their information appears on the Skilled Trades Ontario Public Register, where anyone can check whether a specific person is certified.
Working in this trade without one of those three documents is an offence, subject to limited exemptions such as approved pre-apprenticeship program participants. See the full list of compulsory trades in Ontario for how this trade compares to the other 22.
How do you become a motorcycle technician in Ontario?
The apprenticeship pathway for this trade is administered by Skilled Trades Ontario under section 14 of the Building Opportunities in the Skilled Trades Act, 2021:
- Find a sponsor and register a training agreement. An employer or union sponsor takes you on and the training agreement is registered with the ministry. For this trade the Registered Training Agreement is also your legal authorization to work while you train.
- Complete the on the job and in school training. The skills are set out in the trade's Apprenticeship Training Standard, signed off by your sponsor as you demonstrate them, alongside levels of in school theory at a training delivery agent.
- Receive your Certificate of Apprenticeship. Skilled Trades Ontario issues it when the program is complete.
- Pass the certifying exam. This trade has a certifying exam under O. Reg. 876/21, s. 3. Passing it earns the Certificate of Qualification, which compulsory trade workers must then hold and renew to keep practicing. How to book the exam and where to write it.
The exact training standard, current curriculum and program details are on the Skilled Trades Ontario page for Motorcycle Technician. On the job hour requirements vary by trade and are not published on this page yet; confirm them in the training standard before signing an agreement.
Is the 310G a Red Seal trade?
Yes. Motorcycle Technician participates in the Interprovincial Red Seal Program, the national standard for the trade across Canada, stewarded by the Canadian Council of Directors of Apprenticeship. A Red Seal endorsement on an Ontario Certificate of Qualification means the qualification is recognized in other provinces and territories without re examination, which matters for workers moving between provinces and for employers hiring from outside Ontario.
The Red Seal exam for this trade, written under the national title Motorcycle Technician, has 130 multiple-choice questions, each with four possible answers and exactly one correct answer.
How the 130 questions are distributed
| Major Work Activity | Questions |
|---|---|
| A. Performs common occupational skills | 8 |
| B. Maintains chassis and suspension | 13 |
| C. Maintains wheels and tires | 11 |
| D. Maintains brakes | 13 |
| E. Maintains engines | 18 |
| F. Maintains power transfer | 16 |
| G. Maintains electrical systems | 20 |
| H. Maintains vehicle management systems | 16 |
| I. Maintains fuel and exhaust systems | 15 |
By question type, this trade's exam runs 5 to 15% knowledge and recall, 45 to 55% procedural and application, and 35 to 45% critical thinking.
How often does the certificate need to be renewed?
Journeypersons in compulsory trades must renew their Certificate of Qualification every year, per Skilled Trades Ontario. A lapsed certificate in a compulsory trade means the holder is no longer legally entitled to practice the trade until it is restored, so the renewal date is worth tracking ahead of time. The current renewal fee is not published on this page yet; confirm it with Skilled Trades Ontario.
Already experienced? The Trade Equivalency Assessment
Workers with experience from outside Ontario's apprenticeship system, or from another country, can apply for a Trade Equivalency Assessment instead of starting an apprenticeship. Approval requires verifiable evidence of competency in the trade's Training Standard and experience at least equal to the trade's total training time; if approved, you challenge the certifying exam directly. The assessment costs $235 plus HST, and a reassessment with new evidence costs $100 plus HST, per Skilled Trades Ontario's Trade Equivalency Assessment page.
Certification is not the only paperwork
A Certificate of Qualification covers the person. Running a business in the trade carries its own obligations: many Ontario municipalities require a contractor licence on top of personal certification, and construction employers must complete WSIB registration before work begins. Both are indexed on our sister site: municipal contractor licensing requirements by city and WSIB Form 1000, registration of constructors and employers, on Ontario Trade Registry.
What does a motorcycle technician earn in Ontario?
| Median wage | $31.55 per hour |
|---|---|
| Low | $22.42 |
| High | $41.57 |
| Occupation measured | Motorcycle, all-terrain vehicle and other related mechanics (NOC 72423) |
| Reference period | 2024 |
Published by Employment and Social Development Canada through Job Bank, for Ontario as a whole. Read it as the pay range for the occupational group this trade belongs to, not a guaranteed rate: one NOC code can cover more than one trade, and wages vary by region, employer and experience.
Is the 310G recognised outside Ontario?
This trade has been part of the Interprovincial Red Seal Program since 1992. 7 of Canada's 13 provinces and territories designate it Red Seal: NL, NS, PE, NB, ON, AB, BC, Ontario among them. Its National Occupational Classification code is 72423, which is how federal labour market data refers to this occupation.
Where can you train as a motorcycle technician in Ontario?
| Public training providers | 2 colleges deliver the in-school portion |
|---|---|
| Approved sponsors | 181 employers registered to train apprentices |
| Apprentices in training | 297 |
Counts are from Ontario's published apprenticeships dataset. A sponsor is the employer or union that registers and trains the apprentice; you need one before an apprenticeship can start.
Related Ontario trades
Other motive power sector trades with certification records on this registry:
Official verification sources
- RegulationO. Reg. 876/21, Prescribed Trades and Related Matters (e-Laws)
- Certifying bodySkilled Trades Ontario: Motorcycle Technician
- ActBuilding Opportunities in the Skilled Trades Act, 2021 (e-Laws)
- WagesJob Bank wage data, Employment and Social Development Canada
- Red Seal profilered-seal.ca: Motorcycle Technician trade profile
- Participation dataOntario open data: Apprenticeships dataset
Classification, exam requirement and ratio status on this page are read directly from O. Reg. 876/21 as consolidated on e-Laws, not from secondary summaries. Facts not yet verified against a primary source are marked as not published rather than estimated.