United States · Official-source record

Electrician license requirements in New Mexico

New Mexico issues electrician licenses at the state level, through The Construction Industries Division (CID) of the Regulation and Licensing Department..

View source
What the source says
To act in the capacity of a contractor as defined in Section 60-13-3 NMSA 1978, an entity must be issued a license.
View source
What the source says
The Construction Industries Division (CID) of the Regulation and Licensing Department.

Who regulates it

Regulator
The Construction Industries Division (CID) of the Regulation and Licensing Department.View source
What the source says
The Construction Industries Division (CID) of the Regulation and Licensing Department.
Regulator website
https://www.rld.nm.gov/construction-industries/find-a-bureau/bureaus/electrical-bureau/View source
What the source says
Electrical Bureau
Statute or rule
14.6.4 NMACView source
What the source says
14.6.4 NMAC

Credential status

Licensing level
StateView source
What the source says
To act in the capacity of a contractor as defined in Section 60-13-3 NMSA 1978, an entity must be issued a license.

Credential levels

ER-1J Journeyman Residential Electrical WiringView source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 1 Code Examination # of Questions % Required to Pass Time Allowed 40 75% (30 points) 90 minutes

Experience
4,000 hoursView source
What the source says
TWO YEARS (4,000 hours) ER-1J Journeyman residential wiring ES-1J Journeyman electrical signs and outline lighting ES-2J Journeyman cathodic protection and lightening protection systems ES-3J Journeyman sound, intercommunication, electrical alarm systems, and systems 50 volts and under ES-7J Journeyman telephone communication systems and telephone interconnect systems ES10J Water Well Pump Installer ES10RJ Residential Water Well Pump Installer
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s).
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 1 Code Examination # of Questions % Required to Pass Time Allowed 40 75% (30 points) 90 minutes
Application fee
$75 USDView source
What the source says
There is an application fee of $75.00 per classification.
Renewal term (years)
3View source
What the source says
Your New Mexico Journeyman’s Certificate will be active for three years, effective the last day of the month of issuance.
Minimum age
18View source
What the source says
No individual under the age of 18 shall be issued a certificate of competence.
Alternate route 1
Accredited technical training may replace up to one-half of required work experience; each year of equivalent training counts as one-half year of experience.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 2
An active New Mexico qualifying party in the same scope may apply for a parallel journeyman certificate without a work verification form.View source
What the source says
If you are already an active, licensed NM QP in the same scope of work, you may apply for the Journeyman certificate which parallels your existing certificate. You do not need a Work Verification Form.

Exam parts

ER-1J Journeyman Residential Electrical Wiring Part 1 Code ExaminationView source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 1 Code Examination # of Questions % Required to Pass Time Allowed 40 75% (30 points) 90 minutes
Questions
40View source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 1 Code Examination # of Questions % Required to Pass Time Allowed 40 75% (30 points) 90 minutes
Time (minutes)
90View source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 1 Code Examination # of Questions % Required to Pass Time Allowed 40 75% (30 points) 90 minutes
Passing mark (%)
75View source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 1 Code Examination # of Questions % Required to Pass Time Allowed 40 75% (30 points) 90 minutes
Exam fee
$68.88 USDView source
What the source says
ER-1J Journeyman Residential Electrical Wiring (Part 1) Written $68.88
ER-1J Journeyman Residential Electrical Wiring Part 2 Theory ExaminationView source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 2 Theory Examination # of Questions % Required to Pass Time Allowed 25 75% (19 points) 60 minutes
Questions
25View source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 2 Theory Examination # of Questions % Required to Pass Time Allowed 25 75% (19 points) 60 minutes
Time (minutes)
60View source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 2 Theory Examination # of Questions % Required to Pass Time Allowed 25 75% (19 points) 60 minutes
Passing mark (%)
75View source
What the source says
ER-1J Journeyman Residential Electrical Wiring Part 2 Theory Examination # of Questions % Required to Pass Time Allowed 25 75% (19 points) 60 minutes
Exam fee
$68.88 USDView source
What the source says
ER-1J Journeyman Residential Electrical Wiring (Part 2) Written $68.88
Journeyman Residential Electrical Practical ExaminationView source
What the source says
Journeyman Residential Electrical Practical Examination # of Points % Required to Pass Time Allowed 100 75% (75 points) 120 minutes
Time (minutes)
120View source
What the source says
Journeyman Residential Electrical Practical Examination # of Points % Required to Pass Time Allowed 100 75% (75 points) 120 minutes
Passing mark (%)
75View source
What the source says
Journeyman Residential Electrical Practical Examination # of Points % Required to Pass Time Allowed 100 75% (75 points) 120 minutes
Exam fee
$68.88 USDView source
What the source says
Residential Journeyman Electrician Practical $68.88

Not stated in the official sources we checked: Classroom training, Open book, Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-1J Journeyman Electrical Signs and Outline LightingView source
What the source says
ES-1J Journeyman Electrical Signs and Outline Lighting # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes

Experience
4,000 hoursView source
What the source says
TWO YEARS (4,000 hours) ER-1J Journeyman residential wiring ES-1J Journeyman electrical signs and outline lighting ES-2J Journeyman cathodic protection and lightening protection systems ES-3J Journeyman sound, intercommunication, electrical alarm systems, and systems 50 volts and under ES-7J Journeyman telephone communication systems and telephone interconnect systems ES10J Water Well Pump Installer ES10RJ Residential Water Well Pump Installer
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s).
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Exam questions
50View source
What the source says
ES-1J Journeyman Electrical Signs and Outline Lighting # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Exam time (minutes)
120View source
What the source says
ES-1J Journeyman Electrical Signs and Outline Lighting # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Passing mark (%)
75View source
What the source says
ES-1J Journeyman Electrical Signs and Outline Lighting # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$75 USDView source
What the source says
There is an application fee of $75.00 per classification.
Exam fee
$68.88 USDView source
What the source says
ES-1J Journeyman Electrical Signs and Outline Lighting $68.88
Renewal term (years)
3View source
What the source says
Your New Mexico Journeyman’s Certificate will be active for three years, effective the last day of the month of issuance.
Minimum age
18View source
What the source says
No individual under the age of 18 shall be issued a certificate of competence.
Alternate route 1
Accredited technical training may replace up to one-half of required work experience; each year of equivalent training counts as one-half year of experience.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 2
An active New Mexico qualifying party in the same scope may apply for a parallel journeyman certificate without a work verification form.View source
What the source says
If you are already an active, licensed NM QP in the same scope of work, you may apply for the Journeyman certificate which parallels your existing certificate. You do not need a Work Verification Form.

Not stated in the official sources we checked: Classroom training, Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-2J Journeyman Cathodic Protection, and Lightning Protection SystemsView source
What the source says
ES-2J Journeyman Cathodic Protection, and Lightning Protection Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes

Experience
4,000 hoursView source
What the source says
TWO YEARS (4,000 hours) ER-1J Journeyman residential wiring ES-1J Journeyman electrical signs and outline lighting ES-2J Journeyman cathodic protection and lightening protection systems ES-3J Journeyman sound, intercommunication, electrical alarm systems, and systems 50 volts and under ES-7J Journeyman telephone communication systems and telephone interconnect systems ES10J Water Well Pump Installer ES10RJ Residential Water Well Pump Installer
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s).
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Exam questions
50View source
What the source says
ES-2J Journeyman Cathodic Protection, and Lightning Protection Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Exam time (minutes)
120View source
What the source says
ES-2J Journeyman Cathodic Protection, and Lightning Protection Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Passing mark (%)
75View source
What the source says
ES-2J Journeyman Cathodic Protection, and Lightning Protection Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$75 USDView source
What the source says
There is an application fee of $75.00 per classification.
Exam fee
$68.88 USDView source
What the source says
ES-2J Journeyman Cathodic Protection, and Lightning Protection Systems $68.88
Renewal term (years)
3View source
What the source says
Your New Mexico Journeyman’s Certificate will be active for three years, effective the last day of the month of issuance.
Minimum age
18View source
What the source says
No individual under the age of 18 shall be issued a certificate of competence.
Alternate route 1
Accredited technical training may replace up to one-half of required work experience; each year of equivalent training counts as one-half year of experience.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 2
An active New Mexico qualifying party in the same scope may apply for a parallel journeyman certificate without a work verification form.View source
What the source says
If you are already an active, licensed NM QP in the same scope of work, you may apply for the Journeyman certificate which parallels your existing certificate. You do not need a Work Verification Form.

Not stated in the official sources we checked: Classroom training, Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-3J Journeyman Low Voltage Special Systems (under 50 Volts)View source
What the source says
ES-3J Journeyman Low Voltage Special Systems (under 50 Volts) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes

Experience
4,000 hoursView source
What the source says
TWO YEARS (4,000 hours) ER-1J Journeyman residential wiring ES-1J Journeyman electrical signs and outline lighting ES-2J Journeyman cathodic protection and lightening protection systems ES-3J Journeyman sound, intercommunication, electrical alarm systems, and systems 50 volts and under ES-7J Journeyman telephone communication systems and telephone interconnect systems ES10J Water Well Pump Installer ES10RJ Residential Water Well Pump Installer
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s).
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Exam questions
50View source
What the source says
ES-3J Journeyman Low Voltage Special Systems (under 50 Volts) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Exam time (minutes)
145View source
What the source says
ES-3J Journeyman Low Voltage Special Systems (under 50 Volts) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Passing mark (%)
75View source
What the source says
ES-3J Journeyman Low Voltage Special Systems (under 50 Volts) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$75 USDView source
What the source says
There is an application fee of $75.00 per classification.
Exam fee
$68.88 USDView source
What the source says
ES-3J Journeyman Low Voltage Special Systems (Under 50 Volts) $68.88
Renewal term (years)
3View source
What the source says
Your New Mexico Journeyman’s Certificate will be active for three years, effective the last day of the month of issuance.
Minimum age
18View source
What the source says
No individual under the age of 18 shall be issued a certificate of competence.
Alternate route 1
Accredited technical training may replace up to one-half of required work experience; each year of equivalent training counts as one-half year of experience.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 2
An active New Mexico qualifying party in the same scope may apply for a parallel journeyman certificate without a work verification form.View source
What the source says
If you are already an active, licensed NM QP in the same scope of work, you may apply for the Journeyman certificate which parallels your existing certificate. You do not need a Work Verification Form.

Not stated in the official sources we checked: Classroom training, Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-7J Journeyman Telephone Communication Systems and Telephone Interconnect SystemsView source
What the source says
ES-7J Journeyman Telephone Communication Systems and Telephone Interconnect Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 135 Minutes

Experience
4,000 hoursView source
What the source says
TWO YEARS (4,000 hours) ER-1J Journeyman residential wiring ES-1J Journeyman electrical signs and outline lighting ES-2J Journeyman cathodic protection and lightening protection systems ES-3J Journeyman sound, intercommunication, electrical alarm systems, and systems 50 volts and under ES-7J Journeyman telephone communication systems and telephone interconnect systems ES10J Water Well Pump Installer ES10RJ Residential Water Well Pump Installer
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s).
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Exam questions
50View source
What the source says
ES-7J Journeyman Telephone Communication Systems and Telephone Interconnect Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 135 Minutes
Exam time (minutes)
135View source
What the source says
ES-7J Journeyman Telephone Communication Systems and Telephone Interconnect Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 135 Minutes
Passing mark (%)
75View source
What the source says
ES-7J Journeyman Telephone Communication Systems and Telephone Interconnect Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 135 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$75 USDView source
What the source says
There is an application fee of $75.00 per classification.
Exam fee
$68.88 USDView source
What the source says
ES-7J Journeyman Telephone Communication Systems and Telephone Interconnect $68.88
Renewal term (years)
3View source
What the source says
Your New Mexico Journeyman’s Certificate will be active for three years, effective the last day of the month of issuance.
Minimum age
18View source
What the source says
No individual under the age of 18 shall be issued a certificate of competence.
Alternate route 1
Accredited technical training may replace up to one-half of required work experience; each year of equivalent training counts as one-half year of experience.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 2
An active New Mexico qualifying party in the same scope may apply for a parallel journeyman certificate without a work verification form.View source
What the source says
If you are already an active, licensed NM QP in the same scope of work, you may apply for the Journeyman certificate which parallels your existing certificate. You do not need a Work Verification Form.

Not stated in the official sources we checked: Classroom training, Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-10RJ Journeyman Residential Water Well Pump InstallerView source
What the source says
ES-10RJ Journeyman Residential Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes

Experience
4,000 hoursView source
What the source says
TWO YEARS (4,000 hours) ER-1J Journeyman residential wiring ES-1J Journeyman electrical signs and outline lighting ES-2J Journeyman cathodic protection and lightening protection systems ES-3J Journeyman sound, intercommunication, electrical alarm systems, and systems 50 volts and under ES-7J Journeyman telephone communication systems and telephone interconnect systems ES10J Water Well Pump Installer ES10RJ Residential Water Well Pump Installer
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s).
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Exam questions
50View source
What the source says
ES-10RJ Journeyman Residential Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Exam time (minutes)
120View source
What the source says
ES-10RJ Journeyman Residential Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Passing mark (%)
75View source
What the source says
ES-10RJ Journeyman Residential Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$75 USDView source
What the source says
There is an application fee of $75.00 per classification.
Exam fee
$68.88 USDView source
What the source says
ES-10RJ Journeyman Residential Water Well Pump Installer $68.88
Renewal term (years)
3View source
What the source says
Your New Mexico Journeyman’s Certificate will be active for three years, effective the last day of the month of issuance.
Minimum age
18View source
What the source says
No individual under the age of 18 shall be issued a certificate of competence.
Alternate route 1
Accredited technical training may replace up to one-half of required work experience; each year of equivalent training counts as one-half year of experience.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 2
An active New Mexico qualifying party in the same scope may apply for a parallel journeyman certificate without a work verification form.View source
What the source says
If you are already an active, licensed NM QP in the same scope of work, you may apply for the Journeyman certificate which parallels your existing certificate. You do not need a Work Verification Form.

Not stated in the official sources we checked: Classroom training, Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-10J Journeyman Water Well Pump InstallerView source
What the source says
ES-10J Journeyman Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes

Experience
4,000 hoursView source
What the source says
TWO YEARS (4,000 hours) ER-1J Journeyman residential wiring ES-1J Journeyman electrical signs and outline lighting ES-2J Journeyman cathodic protection and lightening protection systems ES-3J Journeyman sound, intercommunication, electrical alarm systems, and systems 50 volts and under ES-7J Journeyman telephone communication systems and telephone interconnect systems ES10J Water Well Pump Installer ES10RJ Residential Water Well Pump Installer
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s).
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Exam questions
50View source
What the source says
ES-10J Journeyman Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Exam time (minutes)
120View source
What the source says
ES-10J Journeyman Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Passing mark (%)
75View source
What the source says
ES-10J Journeyman Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$75 USDView source
What the source says
There is an application fee of $75.00 per classification.
Exam fee
$68.88 USDView source
What the source says
ES-10J Journeyman Water Well Pump Installer $68.88
Renewal term (years)
3View source
What the source says
Your New Mexico Journeyman’s Certificate will be active for three years, effective the last day of the month of issuance.
Minimum age
18View source
What the source says
No individual under the age of 18 shall be issued a certificate of competence.
Alternate route 1
Accredited technical training may replace up to one-half of required work experience; each year of equivalent training counts as one-half year of experience.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 2
An active New Mexico qualifying party in the same scope may apply for a parallel journeyman certificate without a work verification form.View source
What the source says
If you are already an active, licensed NM QP in the same scope of work, you may apply for the Journeyman certificate which parallels your existing certificate. You do not need a Work Verification Form.

Not stated in the official sources we checked: Classroom training, Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

EE-98J Journeyman Residential and Commercial ElectricalView source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 1 Code Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 minutes

Experience
8,000 hoursView source
What the source says
FOUR YEARS (8,000 hours) EE-98J Journeyman residential and commercial electrical EL-1J Journeyman electrical distribution systems, including transmission
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s).
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 1 Code Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 minutes
Application fee
$75 USDView source
What the source says
There is an application fee of $75.00 per classification.
Renewal term (years)
3View source
What the source says
Your New Mexico Journeyman’s Certificate will be active for three years, effective the last day of the month of issuance.
Continuing education
16 hoursView source
What the source says
Prior to renewal of a journeyman certificate of competence in the applicable classification, the applicant for renewal or reinstatement is required to complete a minimum of 16 hours of approved course work.
Minimum age
18View source
What the source says
No individual under the age of 18 shall be issued a certificate of competence.
Alternate route 1
Accredited technical training may replace up to one-half of required work experience; each year of equivalent training counts as one-half year of experience.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 2
An active New Mexico qualifying party in the same scope may apply for a parallel journeyman certificate without a work verification form.View source
What the source says
If you are already an active, licensed NM QP in the same scope of work, you may apply for the Journeyman certificate which parallels your existing certificate. You do not need a Work Verification Form.
Alternate route 3
EE-98J reciprocity from Alaska, Arkansas, Colorado, Idaho, Montana, Nebraska, Oklahoma, South Dakota, Texas and Wyoming.View source
What the source says
EE-98J reciprocity is accepted from Alaska, Arkansas, Colorado, Idaho, Montana, Nebraska, Oklahoma, South Dakota, Texas and Wyoming.

Exam parts

EE-98J Journeyman Residential and Commercial Electrical Part 1 Code ExaminationView source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 1 Code Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 minutes
Questions
50View source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 1 Code Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 minutes
Time (minutes)
145View source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 1 Code Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 minutes
Passing mark (%)
75View source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 1 Code Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 minutes
Exam fee
$68.88 USDView source
What the source says
EE-98J Journeyman Residential and Commercial Electrical (Part 1) Written $68.88
EE-98J Journeyman Residential and Commercial Electrical Part 2 Theory ExaminationView source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 2 Theory Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 minutes
Questions
50View source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 2 Theory Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 minutes
Time (minutes)
120View source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 2 Theory Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 minutes
Passing mark (%)
75View source
What the source says
EE-98J Journeyman Residential and Commercial Electrical Part 2 Theory Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 minutes
Exam fee
$68.88 USDView source
What the source says
EE-98J Journeyman Residential and Commercial Electrical (Part 2) Written $68.88
Journeyman Residential and Commercial Electrical Practical ExaminationView source
What the source says
Journeyman Residential and Commercial Electrical Practical Examination # of Points % Required to Pass Time Allowed 100 75% (75 points) 120 minutes
Time (minutes)
120View source
What the source says
Journeyman Residential and Commercial Electrical Practical Examination # of Points % Required to Pass Time Allowed 100 75% (75 points) 120 minutes
Passing mark (%)
75View source
What the source says
Journeyman Residential and Commercial Electrical Practical Examination # of Points % Required to Pass Time Allowed 100 75% (75 points) 120 minutes
Exam fee
$68.88 USDView source
What the source says
Journeyman Residential and Commercial Electrical Practical $68.88

Not stated in the official sources we checked: Classroom training, Open book, Prerequisite license, Insurance required, Bond required, Person of record required.

EL-1J Journeyman Electrical Distribution Systems, including Transmission LinesView source
What the source says
EL-1J Journeyman Electrical Distribution Systems, including Transmission Lines # of Questions % Required to Pass Time Allowed 80 75% (60 points) 205 Minutes

Experience
8,000 hoursView source
What the source says
FOUR YEARS (8,000 hours) EE-98J Journeyman residential and commercial electrical EL-1J Journeyman electrical distribution systems, including transmission
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s).
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Exam questions
80View source
What the source says
EL-1J Journeyman Electrical Distribution Systems, including Transmission Lines # of Questions % Required to Pass Time Allowed 80 75% (60 points) 205 Minutes
Exam time (minutes)
205View source
What the source says
EL-1J Journeyman Electrical Distribution Systems, including Transmission Lines # of Questions % Required to Pass Time Allowed 80 75% (60 points) 205 Minutes
Passing mark (%)
75View source
What the source says
EL-1J Journeyman Electrical Distribution Systems, including Transmission Lines # of Questions % Required to Pass Time Allowed 80 75% (60 points) 205 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$75 USDView source
What the source says
There is an application fee of $75.00 per classification.
Exam fee
$68.88 USDView source
What the source says
EL-1J Journeyman Electrical Distribution Systems including Transmission Lines $68.88
Renewal term (years)
3View source
What the source says
Your New Mexico Journeyman’s Certificate will be active for three years, effective the last day of the month of issuance.
Continuing education
16 hoursView source
What the source says
Prior to renewal of a journeyman certificate of competence in the applicable classification, the applicant for renewal or reinstatement is required to complete a minimum of 16 hours of approved course work.
Minimum age
18View source
What the source says
No individual under the age of 18 shall be issued a certificate of competence.
Alternate route 1
Accredited technical training may replace up to one-half of required work experience; each year of equivalent training counts as one-half year of experience.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 2
An active New Mexico qualifying party in the same scope may apply for a parallel journeyman certificate without a work verification form.View source
What the source says
If you are already an active, licensed NM QP in the same scope of work, you may apply for the Journeyman certificate which parallels your existing certificate. You do not need a Work Verification Form.

Not stated in the official sources we checked: Classroom training, Prerequisite license, Insurance required, Bond required, Person of record required.

ER-1 Qualifying Party CertificateView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties

Experience
4,000 hoursView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s)*.
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
ER-1 Residential Electrical Wiring # of Questions % Required to Pass Time Allowed 80 75% (60 points) 180 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$30 USDView source
What the source says
There is an application fee of $30.00.
License fee
$6 USDView source
What the source says
You may submit one application with multiple classifications but there is a separate Certificate fee of $6.00 for each classification.
Minimum age
18View source
What the source says
Are issued only to individuals who are 18 years of age or older;
Alternate route 1
An approved Business & Law course completion certificate may replace the Business & Law test.View source
What the source says
In addition to trade specific exams, if required, all new QP applicants must take and pass the Business & Law test offered by PSI or take an approved Business & Law course and receive a completion certificate.
Alternate route 2
Accredited technical training may replace up to half of required work experience, with each year of equivalent training credited as half a year.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.

Exam parts

ER-1 Residential Electrical WiringView source
What the source says
ER-1 Residential Electrical Wiring # of Questions % Required to Pass Time Allowed 80 75% (60 points) 180 Minutes
Questions
80View source
What the source says
ER-1 Residential Electrical Wiring # of Questions % Required to Pass Time Allowed 80 75% (60 points) 180 Minutes
Time (minutes)
180View source
What the source says
ER-1 Residential Electrical Wiring # of Questions % Required to Pass Time Allowed 80 75% (60 points) 180 Minutes
Passing mark (%)
75View source
What the source says
ER-1 Residential Electrical Wiring # of Questions % Required to Pass Time Allowed 80 75% (60 points) 180 Minutes
Exam fee
$107.63 USDView source
What the source says
ER-1 $107.63
Business and Law ExaminationView source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Questions
50View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Time (minutes)
130View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Passing mark (%)
75View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Exam fee
$68.88 USDView source
What the source says
Business and Law Exam (REQUIRED OF ALL NEW CANDIDATES) $68.88

Not stated in the official sources we checked: Classroom training, Renewal term (years), Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-1 Qualifying Party CertificateView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties

Experience
4,000 hoursView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s)*.
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
ES-1 Electrical Signs and Outline Lighting # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$30 USDView source
What the source says
There is an application fee of $30.00.
License fee
$6 USDView source
What the source says
You may submit one application with multiple classifications but there is a separate Certificate fee of $6.00 for each classification.
Minimum age
18View source
What the source says
Are issued only to individuals who are 18 years of age or older;
Alternate route 1
An approved Business & Law course completion certificate may replace the Business & Law test.View source
What the source says
In addition to trade specific exams, if required, all new QP applicants must take and pass the Business & Law test offered by PSI or take an approved Business & Law course and receive a completion certificate.
Alternate route 2
Accredited technical training may replace up to half of required work experience, with each year of equivalent training credited as half a year.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.

Exam parts

ES-1 Electrical Signs and Outline LightingView source
What the source says
ES-1 Electrical Signs and Outline Lighting # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Questions
50View source
What the source says
ES-1 Electrical Signs and Outline Lighting # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Time (minutes)
120View source
What the source says
ES-1 Electrical Signs and Outline Lighting # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Passing mark (%)
75View source
What the source says
ES-1 Electrical Signs and Outline Lighting # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Exam fee
$68.88 USDView source
What the source says
EL-1 ES-1 ES-2 ES-3 ES-7 ES-10 ES-10J ES-10R EV-98 MM-1 MM-2 MM-3 MM-4 MS-3 MS-6 MS-12 MS-14 $68.88 each
Business and Law ExaminationView source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Questions
50View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Time (minutes)
130View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Passing mark (%)
75View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Exam fee
$68.88 USDView source
What the source says
Business and Law Exam (REQUIRED OF ALL NEW CANDIDATES) $68.88

Not stated in the official sources we checked: Classroom training, Renewal term (years), Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-2 Qualifying Party CertificateView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties

Experience
4,000 hoursView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s)*.
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
ES-2 Cathodic Protection and Lightning Protection Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$30 USDView source
What the source says
There is an application fee of $30.00.
License fee
$6 USDView source
What the source says
You may submit one application with multiple classifications but there is a separate Certificate fee of $6.00 for each classification.
Minimum age
18View source
What the source says
Are issued only to individuals who are 18 years of age or older;
Alternate route 1
An approved Business & Law course completion certificate may replace the Business & Law test.View source
What the source says
In addition to trade specific exams, if required, all new QP applicants must take and pass the Business & Law test offered by PSI or take an approved Business & Law course and receive a completion certificate.
Alternate route 2
Accredited technical training may replace up to half of required work experience, with each year of equivalent training credited as half a year.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.

Exam parts

ES-2 Cathodic Protection and Lightning Protection SystemsView source
What the source says
ES-2 Cathodic Protection and Lightning Protection Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Questions
50View source
What the source says
ES-2 Cathodic Protection and Lightning Protection Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Time (minutes)
120View source
What the source says
ES-2 Cathodic Protection and Lightning Protection Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Passing mark (%)
75View source
What the source says
ES-2 Cathodic Protection and Lightning Protection Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Exam fee
$68.88 USDView source
What the source says
EL-1 ES-1 ES-2 ES-3 ES-7 ES-10 ES-10J ES-10R EV-98 MM-1 MM-2 MM-3 MM-4 MS-3 MS-6 MS-12 MS-14 $68.88 each
Business and Law ExaminationView source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Questions
50View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Time (minutes)
130View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Passing mark (%)
75View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Exam fee
$68.88 USDView source
What the source says
Business and Law Exam (REQUIRED OF ALL NEW CANDIDATES) $68.88

Not stated in the official sources we checked: Classroom training, Renewal term (years), Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-3 Qualifying Party CertificateView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties

Experience
4,000 hoursView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s)*.
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
ES-3 Low Voltage Special Systems (under 50 Volts) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$30 USDView source
What the source says
There is an application fee of $30.00.
License fee
$6 USDView source
What the source says
You may submit one application with multiple classifications but there is a separate Certificate fee of $6.00 for each classification.
Minimum age
18View source
What the source says
Are issued only to individuals who are 18 years of age or older;
Alternate route 1
An approved Business & Law course completion certificate may replace the Business & Law test.View source
What the source says
In addition to trade specific exams, if required, all new QP applicants must take and pass the Business & Law test offered by PSI or take an approved Business & Law course and receive a completion certificate.
Alternate route 2
Accredited technical training may replace up to half of required work experience, with each year of equivalent training credited as half a year.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.

Exam parts

ES-3 Low Voltage Special Systems (under 50 Volts)View source
What the source says
ES-3 Low Voltage Special Systems (under 50 Volts) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Questions
50View source
What the source says
ES-3 Low Voltage Special Systems (under 50 Volts) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Time (minutes)
145View source
What the source says
ES-3 Low Voltage Special Systems (under 50 Volts) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Passing mark (%)
75View source
What the source says
ES-3 Low Voltage Special Systems (under 50 Volts) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Exam fee
$68.88 USDView source
What the source says
EL-1 ES-1 ES-2 ES-3 ES-7 ES-10 ES-10J ES-10R EV-98 MM-1 MM-2 MM-3 MM-4 MS-3 MS-6 MS-12 MS-14 $68.88 each
Business and Law ExaminationView source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Questions
50View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Time (minutes)
130View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Passing mark (%)
75View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Exam fee
$68.88 USDView source
What the source says
Business and Law Exam (REQUIRED OF ALL NEW CANDIDATES) $68.88

Not stated in the official sources we checked: Classroom training, Renewal term (years), Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-7 Qualifying Party CertificateView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties

Experience
4,000 hoursView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s)*.
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
ES-7 Telephone Communication Systems and Telephone Interconnect Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$30 USDView source
What the source says
There is an application fee of $30.00.
License fee
$6 USDView source
What the source says
You may submit one application with multiple classifications but there is a separate Certificate fee of $6.00 for each classification.
Minimum age
18View source
What the source says
Are issued only to individuals who are 18 years of age or older;
Alternate route 1
An approved Business & Law course completion certificate may replace the Business & Law test.View source
What the source says
In addition to trade specific exams, if required, all new QP applicants must take and pass the Business & Law test offered by PSI or take an approved Business & Law course and receive a completion certificate.
Alternate route 2
Accredited technical training may replace up to half of required work experience, with each year of equivalent training credited as half a year.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.

Exam parts

ES-7 Telephone Communication Systems and Telephone Interconnect SystemsView source
What the source says
ES-7 Telephone Communication Systems and Telephone Interconnect Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Questions
50View source
What the source says
ES-7 Telephone Communication Systems and Telephone Interconnect Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Time (minutes)
145View source
What the source says
ES-7 Telephone Communication Systems and Telephone Interconnect Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Passing mark (%)
75View source
What the source says
ES-7 Telephone Communication Systems and Telephone Interconnect Systems # of Questions % Required to Pass Time Allowed 50 75% (38 points) 145 Minutes
Exam fee
$68.88 USDView source
What the source says
EL-1 ES-1 ES-2 ES-3 ES-7 ES-10 ES-10J ES-10R EV-98 MM-1 MM-2 MM-3 MM-4 MS-3 MS-6 MS-12 MS-14 $68.88 each
Business and Law ExaminationView source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Questions
50View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Time (minutes)
130View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Passing mark (%)
75View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Exam fee
$68.88 USDView source
What the source says
Business and Law Exam (REQUIRED OF ALL NEW CANDIDATES) $68.88

Not stated in the official sources we checked: Classroom training, Renewal term (years), Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-10R Qualifying Party CertificateView source
What the source says
ES-10R. � Residential water well pump installer. � Requires two years� experience.

Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s)*.
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
ES-10R Residential Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$30 USDView source
What the source says
There is an application fee of $30.00.
License fee
$6 USDView source
What the source says
You may submit one application with multiple classifications but there is a separate Certificate fee of $6.00 for each classification.
Minimum age
18View source
What the source says
Are issued only to individuals who are 18 years of age or older;
Alternate route 1
An approved Business & Law course completion certificate may replace the Business & Law test.View source
What the source says
In addition to trade specific exams, if required, all new QP applicants must take and pass the Business & Law test offered by PSI or take an approved Business & Law course and receive a completion certificate.
Alternate route 2
Accredited technical training may replace up to half of required work experience, with each year of equivalent training credited as half a year.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.

Exam parts

ES-10R Residential Water Well Pump InstallerView source
What the source says
ES-10R Residential Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Questions
50View source
What the source says
ES-10R Residential Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Time (minutes)
120View source
What the source says
ES-10R Residential Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Passing mark (%)
75View source
What the source says
ES-10R Residential Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Exam fee
$68.88 USDView source
What the source says
EL-1 ES-1 ES-2 ES-3 ES-7 ES-10 ES-10J ES-10R EV-98 MM-1 MM-2 MM-3 MM-4 MS-3 MS-6 MS-12 MS-14 $68.88 each
Business and Law ExaminationView source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Questions
50View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Time (minutes)
130View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Passing mark (%)
75View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Exam fee
$68.88 USDView source
What the source says
Business and Law Exam (REQUIRED OF ALL NEW CANDIDATES) $68.88

Not stated in the official sources we checked: Experience, Classroom training, Renewal term (years), Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ES-10 Qualifying Party CertificateView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties

Experience
4,000 hoursView source
What the source says
All qualifying parties must have the required experience for the specific classification(s) of work the license will cover. Work experience requirements are: TWO YEARS (4,000 hours) GB-2 Residential Building GS-1 through GS-34 Building Specialties GA-1 through GA-5 Asphalt, Bitumen, & Concrete GF-1 through GF-9 Fixed Works ER-1 Residential Wiring ES-1 through ES-10 Electrical Specialties MS-3 and MS-6 Mechanical Specialties
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s)*.
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
ES-10 Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$30 USDView source
What the source says
There is an application fee of $30.00.
License fee
$6 USDView source
What the source says
You may submit one application with multiple classifications but there is a separate Certificate fee of $6.00 for each classification.
Minimum age
18View source
What the source says
Are issued only to individuals who are 18 years of age or older;
Alternate route 1
An approved Business & Law course completion certificate may replace the Business & Law test.View source
What the source says
In addition to trade specific exams, if required, all new QP applicants must take and pass the Business & Law test offered by PSI or take an approved Business & Law course and receive a completion certificate.
Alternate route 2
Accredited technical training may replace up to half of required work experience, with each year of equivalent training credited as half a year.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.

Exam parts

ES-10 Water Well Pump InstallerView source
What the source says
ES-10 Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Questions
50View source
What the source says
ES-10 Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Time (minutes)
120View source
What the source says
ES-10 Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Passing mark (%)
75View source
What the source says
ES-10 Water Well Pump Installer # of Questions % Required to Pass Time Allowed 50 75% (38 points) 120 Minutes
Exam fee
$68.88 USDView source
What the source says
EL-1 ES-1 ES-2 ES-3 ES-7 ES-10 ES-10J ES-10R EV-98 MM-1 MM-2 MM-3 MM-4 MS-3 MS-6 MS-12 MS-14 $68.88 each
Business and Law ExaminationView source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Questions
50View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Time (minutes)
130View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Passing mark (%)
75View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Exam fee
$68.88 USDView source
What the source says
Business and Law Exam (REQUIRED OF ALL NEW CANDIDATES) $68.88

Not stated in the official sources we checked: Classroom training, Renewal term (years), Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

EE-98 Qualifying Party CertificateView source
What the source says
FOUR YEARS (8,000 HOURS) GB-98 General Building GA-98 Asphalt, Bitumen, & Concrete GF-98 Fixed Works EE-98 Electrical- Residential & Commercial EL-1 Electrical Distribution Systems

Experience
8,000 hoursView source
What the source says
FOUR YEARS (8,000 HOURS) GB-98 General Building GA-98 Asphalt, Bitumen, & Concrete GF-98 Fixed Works EE-98 Electrical- Residential & Commercial EL-1 Electrical Distribution Systems
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s)*.
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
EE-98 Residential and Commercial Electrical Part 1 (Commercial and Industrial) # of Questions % Required to Pass Time Allowed 80 75% (60 points) 200 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$30 USDView source
What the source says
There is an application fee of $30.00.
Exam fee
$269.06 USDView source
What the source says
EE-98 Exam (three-part test) $269.06
License fee
$6 USDView source
What the source says
You may submit one application with multiple classifications but there is a separate Certificate fee of $6.00 for each classification.
Minimum age
18View source
What the source says
Are issued only to individuals who are 18 years of age or older;
Alternate route 1
An approved Business & Law course completion certificate may replace the Business & Law test.View source
What the source says
In addition to trade specific exams, if required, all new QP applicants must take and pass the Business & Law test offered by PSI or take an approved Business & Law course and receive a completion certificate.
Alternate route 2
Accredited technical training may replace up to half of required work experience, with each year of equivalent training credited as half a year.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.
Alternate route 3
The bureau chief may waive the state-specific written trade examination after an accepted NASCLA accredited examination and completion of all other qualifying-party and journeyman requirements.View source
What the source says
The bureau chief may waive the state specific written trade exam requirement for a qualifying party who has passed the general construction, electrical, or electrical journeyman, national association of state contractors licensing agencies (NASCLA) accredited examination at the passing exam score when applying and successfully completing all other qualifying party requirements and journeyman certification requirements.

Exam parts

EE-98 Residential and Commercial Electrical Part 1 (Commercial and Industrial)View source
What the source says
EE-98 Residential and Commercial Electrical Part 1 (Commercial and Industrial) # of Questions % Required to Pass Time Allowed 80 75% (60 points) 200 Minutes
Questions
80View source
What the source says
EE-98 Residential and Commercial Electrical Part 1 (Commercial and Industrial) # of Questions % Required to Pass Time Allowed 80 75% (60 points) 200 Minutes
Time (minutes)
200View source
What the source says
EE-98 Residential and Commercial Electrical Part 1 (Commercial and Industrial) # of Questions % Required to Pass Time Allowed 80 75% (60 points) 200 Minutes
Passing mark (%)
75View source
What the source says
EE-98 Residential and Commercial Electrical Part 1 (Commercial and Industrial) # of Questions % Required to Pass Time Allowed 80 75% (60 points) 200 Minutes
EE-98 Residential and Commercial Electrical Part 2 (Residential)View source
What the source says
EE-98 Residential and Commercial Electrical Part 2 (Residential) # of Questions % Required to Pass Time Allowed 40 75% (30 points) 100 Minutes
Questions
40View source
What the source says
EE-98 Residential and Commercial Electrical Part 2 (Residential) # of Questions % Required to Pass Time Allowed 40 75% (30 points) 100 Minutes
Time (minutes)
100View source
What the source says
EE-98 Residential and Commercial Electrical Part 2 (Residential) # of Questions % Required to Pass Time Allowed 40 75% (30 points) 100 Minutes
Passing mark (%)
75View source
What the source says
EE-98 Residential and Commercial Electrical Part 2 (Residential) # of Questions % Required to Pass Time Allowed 40 75% (30 points) 100 Minutes
EE-98 Residential and Commercial Electrical Part 3 (Specialties)View source
What the source says
EE-98 Residential and Commercial Electrical Part 3 (Specialties) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 135 Minutes
Questions
50View source
What the source says
EE-98 Residential and Commercial Electrical Part 3 (Specialties) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 135 Minutes
Time (minutes)
135View source
What the source says
EE-98 Residential and Commercial Electrical Part 3 (Specialties) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 135 Minutes
Passing mark (%)
75View source
What the source says
EE-98 Residential and Commercial Electrical Part 3 (Specialties) # of Questions % Required to Pass Time Allowed 50 75% (38 points) 135 Minutes
Business and Law ExaminationView source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Questions
50View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Time (minutes)
130View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Passing mark (%)
75View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Exam fee
$68.88 USDView source
What the source says
Business and Law Exam (REQUIRED OF ALL NEW CANDIDATES) $68.88

Not stated in the official sources we checked: Classroom training, Renewal term (years), Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

EL-1 Qualifying Party CertificateView source
What the source says
FOUR YEARS (8,000 HOURS) GB-98 General Building GA-98 Asphalt, Bitumen, & Concrete GF-98 Fixed Works EE-98 Electrical- Residential & Commercial EL-1 Electrical Distribution Systems

Experience
8,000 hoursView source
What the source says
FOUR YEARS (8,000 HOURS) GB-98 General Building GA-98 Asphalt, Bitumen, & Concrete GF-98 Fixed Works EE-98 Electrical- Residential & Commercial EL-1 Electrical Distribution Systems
Exam required
YesView source
What the source says
Once you have been approved to test, you must pay for, schedule, take, and pass the required exam(s)*.
Exam provider
PSIView source
What the source says
The Construction Industries Division of The New Mexico Regulation and Licensing Department (CID) has contracted with PSI to conduct its examination approval process and examination testing.
Passing mark (%)
75View source
What the source says
EL-1 Electrical Distribution Systems, including Transmission Lines # of Questions % Required to Pass Time Allowed 100 75% (75 points) 265 Minutes
Open book
YesView source
What the source says
This examination is OPEN BOOK.
Application fee
$30 USDView source
What the source says
There is an application fee of $30.00.
License fee
$6 USDView source
What the source says
You may submit one application with multiple classifications but there is a separate Certificate fee of $6.00 for each classification.
Minimum age
18View source
What the source says
Are issued only to individuals who are 18 years of age or older;
Alternate route 1
An approved Business & Law course completion certificate may replace the Business & Law test.View source
What the source says
In addition to trade specific exams, if required, all new QP applicants must take and pass the Business & Law test offered by PSI or take an approved Business & Law course and receive a completion certificate.
Alternate route 2
Accredited technical training may replace up to half of required work experience, with each year of equivalent training credited as half a year.View source
What the source says
Training that is classified as technical training by an accredited college, university, manufacturer�s accredited training program, technical vocational institute or an accredited apprenticeship program will be considered in lieu of work experience. Each year of equivalent training shall be applied as one-half year of experience, but in no case shall accredited training exceed one-half of the total work experience requirement.

Exam parts

EL-1 Electrical Distribution Systems, including Transmission LinesView source
What the source says
EL-1 Electrical Distribution Systems, including Transmission Lines # of Questions % Required to Pass Time Allowed 100 75% (75 points) 265 Minutes
Questions
100View source
What the source says
EL-1 Electrical Distribution Systems, including Transmission Lines # of Questions % Required to Pass Time Allowed 100 75% (75 points) 265 Minutes
Time (minutes)
265View source
What the source says
EL-1 Electrical Distribution Systems, including Transmission Lines # of Questions % Required to Pass Time Allowed 100 75% (75 points) 265 Minutes
Passing mark (%)
75View source
What the source says
EL-1 Electrical Distribution Systems, including Transmission Lines # of Questions % Required to Pass Time Allowed 100 75% (75 points) 265 Minutes
Exam fee
$68.88 USDView source
What the source says
EL-1 ES-1 ES-2 ES-3 ES-7 ES-10 ES-10J ES-10R EV-98 MM-1 MM-2 MM-3 MM-4 MS-3 MS-6 MS-12 MS-14 $68.88 each
Business and Law ExaminationView source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Questions
50View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Time (minutes)
130View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Passing mark (%)
75View source
What the source says
Business and Law Examination # of Questions % Required to Pass Time Allowed 50 75% (38 points) 130 Minutes
Exam fee
$68.88 USDView source
What the source says
Business and Law Exam (REQUIRED OF ALL NEW CANDIDATES) $68.88

Not stated in the official sources we checked: Classroom training, Renewal term (years), Continuing education, Prerequisite license, Insurance required, Bond required, Person of record required.

ER-1. Residential electrical wiring 5000 volts, nominal or less Contractor LicenseView source
What the source says
ER-1. Residential electrical wiring 5000 volts, nominal or less.

Application fee
$36 USDView source
What the source says
An application fee of $36.00 PLUS a classification fee for EACH classification is required to be submitted with the application.
License fee
$150 USDView source
What the source says
Classification Fees: $300 per classification $150 per classification GB02 GB98 GA98 All other single classifications GF98 EE98 MM98
Renewal term (years)
3View source
What the source says
The license will be effective for three years from the date of issuance.
Prerequisite license
At least one certified qualifying party for each classification of work covered by the license.View source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Insurance required
YesView source
What the source says
Workers’ Compensation Insurance is required of all licensees. If you are a sole proprietor with no employees, you may be exempt from worker’s compensation insurance requirements.
Bond required
YesView source
What the source says
Upon initial licensure and as a condition of renewal each applicant shall furnish to the division a bond in the amount of ten thousand dollars ($10,000) underwritten by a corporate surety authorized to transact business in New Mexico.
Person of record required
YesView source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Alternate route
An owner with an expedited military qualifying-party certificate has initial three-year contractor license fees waived.View source
What the source says
If you are an owner and received your Qualifying Party Certificate pursuant to the requirements for expedited licensure as a military service member, the license fees for the initial three-year period are hereby waived.

Not stated in the official sources we checked: Continuing education, Minimum age.

ES-1. Electrical signs and outline lighting Contractor LicenseView source
What the source says
ES-1. � Electrical signs and outline lighting.

Application fee
$36 USDView source
What the source says
An application fee of $36.00 PLUS a classification fee for EACH classification is required to be submitted with the application.
License fee
$150 USDView source
What the source says
Classification Fees: $300 per classification $150 per classification GB02 GB98 GA98 All other single classifications GF98 EE98 MM98
Renewal term (years)
3View source
What the source says
The license will be effective for three years from the date of issuance.
Prerequisite license
At least one certified qualifying party for each classification of work covered by the license.View source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Insurance required
YesView source
What the source says
Workers’ Compensation Insurance is required of all licensees. If you are a sole proprietor with no employees, you may be exempt from worker’s compensation insurance requirements.
Bond required
YesView source
What the source says
Upon initial licensure and as a condition of renewal each applicant shall furnish to the division a bond in the amount of ten thousand dollars ($10,000) underwritten by a corporate surety authorized to transact business in New Mexico.
Person of record required
YesView source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Alternate route
An owner with an expedited military qualifying-party certificate has initial three-year contractor license fees waived.View source
What the source says
If you are an owner and received your Qualifying Party Certificate pursuant to the requirements for expedited licensure as a military service member, the license fees for the initial three-year period are hereby waived.

Not stated in the official sources we checked: Continuing education, Minimum age.

ES-2. Cathodic protection and lightening protection systems Contractor LicenseView source
What the source says
ES-2. Cathodic protection and lightening protection systems.

Application fee
$36 USDView source
What the source says
An application fee of $36.00 PLUS a classification fee for EACH classification is required to be submitted with the application.
License fee
$150 USDView source
What the source says
Classification Fees: $300 per classification $150 per classification GB02 GB98 GA98 All other single classifications GF98 EE98 MM98
Renewal term (years)
3View source
What the source says
The license will be effective for three years from the date of issuance.
Prerequisite license
At least one certified qualifying party for each classification of work covered by the license.View source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Insurance required
YesView source
What the source says
Workers’ Compensation Insurance is required of all licensees. If you are a sole proprietor with no employees, you may be exempt from worker’s compensation insurance requirements.
Bond required
YesView source
What the source says
Upon initial licensure and as a condition of renewal each applicant shall furnish to the division a bond in the amount of ten thousand dollars ($10,000) underwritten by a corporate surety authorized to transact business in New Mexico.
Person of record required
YesView source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Alternate route
An owner with an expedited military qualifying-party certificate has initial three-year contractor license fees waived.View source
What the source says
If you are an owner and received your Qualifying Party Certificate pursuant to the requirements for expedited licensure as a military service member, the license fees for the initial three-year period are hereby waived.

Not stated in the official sources we checked: Continuing education, Minimum age.

ES-3. Low voltage special systems (under 50 volts) Contractor LicenseView source
What the source says
ES-3. � Low voltage special systems (under 50 volts).

Application fee
$36 USDView source
What the source says
An application fee of $36.00 PLUS a classification fee for EACH classification is required to be submitted with the application.
License fee
$150 USDView source
What the source says
Classification Fees: $300 per classification $150 per classification GB02 GB98 GA98 All other single classifications GF98 EE98 MM98
Renewal term (years)
3View source
What the source says
The license will be effective for three years from the date of issuance.
Prerequisite license
At least one certified qualifying party for each classification of work covered by the license.View source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Insurance required
YesView source
What the source says
Workers’ Compensation Insurance is required of all licensees. If you are a sole proprietor with no employees, you may be exempt from worker’s compensation insurance requirements.
Bond required
YesView source
What the source says
Upon initial licensure and as a condition of renewal each applicant shall furnish to the division a bond in the amount of ten thousand dollars ($10,000) underwritten by a corporate surety authorized to transact business in New Mexico.
Person of record required
YesView source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Alternate route
An owner with an expedited military qualifying-party certificate has initial three-year contractor license fees waived.View source
What the source says
If you are an owner and received your Qualifying Party Certificate pursuant to the requirements for expedited licensure as a military service member, the license fees for the initial three-year period are hereby waived.

Not stated in the official sources we checked: Continuing education, Minimum age.

ES-7. Telephone communication systems Contractor LicenseView source
What the source says
ES-7. Telephone communication systems.

Application fee
$36 USDView source
What the source says
An application fee of $36.00 PLUS a classification fee for EACH classification is required to be submitted with the application.
License fee
$150 USDView source
What the source says
Classification Fees: $300 per classification $150 per classification GB02 GB98 GA98 All other single classifications GF98 EE98 MM98
Renewal term (years)
3View source
What the source says
The license will be effective for three years from the date of issuance.
Prerequisite license
At least one certified qualifying party for each classification of work covered by the license.View source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Insurance required
YesView source
What the source says
Workers’ Compensation Insurance is required of all licensees. If you are a sole proprietor with no employees, you may be exempt from worker’s compensation insurance requirements.
Bond required
YesView source
What the source says
Upon initial licensure and as a condition of renewal each applicant shall furnish to the division a bond in the amount of ten thousand dollars ($10,000) underwritten by a corporate surety authorized to transact business in New Mexico.
Person of record required
YesView source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Alternate route
An owner with an expedited military qualifying-party certificate has initial three-year contractor license fees waived.View source
What the source says
If you are an owner and received your Qualifying Party Certificate pursuant to the requirements for expedited licensure as a military service member, the license fees for the initial three-year period are hereby waived.

Not stated in the official sources we checked: Continuing education, Minimum age.

ES-10R. Residential water well pump installer Contractor LicenseView source
What the source says
ES-10R. � Residential water well pump installer.

Application fee
$36 USDView source
What the source says
An application fee of $36.00 PLUS a classification fee for EACH classification is required to be submitted with the application.
License fee
$150 USDView source
What the source says
Classification Fees: $300 per classification $150 per classification GB02 GB98 GA98 All other single classifications GF98 EE98 MM98
Renewal term (years)
3View source
What the source says
The license will be effective for three years from the date of issuance.
Prerequisite license
At least one certified qualifying party for each classification of work covered by the license.View source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Insurance required
YesView source
What the source says
Workers’ Compensation Insurance is required of all licensees. If you are a sole proprietor with no employees, you may be exempt from worker’s compensation insurance requirements.
Bond required
YesView source
What the source says
Upon initial licensure and as a condition of renewal each applicant shall furnish to the division a bond in the amount of ten thousand dollars ($10,000) underwritten by a corporate surety authorized to transact business in New Mexico.
Person of record required
YesView source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Alternate route
An owner with an expedited military qualifying-party certificate has initial three-year contractor license fees waived.View source
What the source says
If you are an owner and received your Qualifying Party Certificate pursuant to the requirements for expedited licensure as a military service member, the license fees for the initial three-year period are hereby waived.

Not stated in the official sources we checked: Continuing education, Minimum age.

ES-10. Water well pump installer Contractor LicenseView source
What the source says
ES-10. Water well pump installer.

Application fee
$36 USDView source
What the source says
An application fee of $36.00 PLUS a classification fee for EACH classification is required to be submitted with the application.
License fee
$150 USDView source
What the source says
Classification Fees: $300 per classification $150 per classification GB02 GB98 GA98 All other single classifications GF98 EE98 MM98
Renewal term (years)
3View source
What the source says
The license will be effective for three years from the date of issuance.
Prerequisite license
At least one certified qualifying party for each classification of work covered by the license.View source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Insurance required
YesView source
What the source says
Workers’ Compensation Insurance is required of all licensees. If you are a sole proprietor with no employees, you may be exempt from worker’s compensation insurance requirements.
Bond required
YesView source
What the source says
Upon initial licensure and as a condition of renewal each applicant shall furnish to the division a bond in the amount of ten thousand dollars ($10,000) underwritten by a corporate surety authorized to transact business in New Mexico.
Person of record required
YesView source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Alternate route
An owner with an expedited military qualifying-party certificate has initial three-year contractor license fees waived.View source
What the source says
If you are an owner and received your Qualifying Party Certificate pursuant to the requirements for expedited licensure as a military service member, the license fees for the initial three-year period are hereby waived.

Not stated in the official sources we checked: Continuing education, Minimum age.

EE-98. Residential, and commercial and industrial electrical wiring 5000 volts, nominal or less Contractor LicenseView source
What the source says
EE-98. Residential, and commercial and industrial electrical wiring 5000 volts, nominal or less.

Application fee
$36 USDView source
What the source says
An application fee of $36.00 PLUS a classification fee for EACH classification is required to be submitted with the application.
License fee
$300 USDView source
What the source says
Classification Fees: $300 per classification $150 per classification GB02 GB98 GA98 All other single classifications GF98 EE98 MM98
Renewal term (years)
3View source
What the source says
The license will be effective for three years from the date of issuance.
Prerequisite license
At least one certified qualifying party for each classification of work covered by the license.View source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Insurance required
YesView source
What the source says
Workers’ Compensation Insurance is required of all licensees. If you are a sole proprietor with no employees, you may be exempt from worker’s compensation insurance requirements.
Bond required
YesView source
What the source says
Upon initial licensure and as a condition of renewal each applicant shall furnish to the division a bond in the amount of ten thousand dollars ($10,000) underwritten by a corporate surety authorized to transact business in New Mexico.
Person of record required
YesView source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Alternate route
An owner with an expedited military qualifying-party certificate has initial three-year contractor license fees waived.View source
What the source says
If you are an owner and received your Qualifying Party Certificate pursuant to the requirements for expedited licensure as a military service member, the license fees for the initial three-year period are hereby waived.

Not stated in the official sources we checked: Continuing education, Minimum age.

EL-1. Electrical distribution and transmission systems over 5000 volts, nominal Contractor LicenseView source
What the source says
EL-1. Electrical distribution and transmission systems over 5000 volts, nominal.

Application fee
$36 USDView source
What the source says
An application fee of $36.00 PLUS a classification fee for EACH classification is required to be submitted with the application.
License fee
$150 USDView source
What the source says
Classification Fees: $300 per classification $150 per classification GB02 GB98 GA98 All other single classifications GF98 EE98 MM98
Renewal term (years)
3View source
What the source says
The license will be effective for three years from the date of issuance.
Prerequisite license
At least one certified qualifying party for each classification of work covered by the license.View source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Insurance required
YesView source
What the source says
Workers’ Compensation Insurance is required of all licensees. If you are a sole proprietor with no employees, you may be exempt from worker’s compensation insurance requirements.
Bond required
YesView source
What the source says
Upon initial licensure and as a condition of renewal each applicant shall furnish to the division a bond in the amount of ten thousand dollars ($10,000) underwritten by a corporate surety authorized to transact business in New Mexico.
Person of record required
YesView source
What the source says
Every license must have at least one qualifying party for each classification of work covered by the license.
Alternate route
An owner with an expedited military qualifying-party certificate has initial three-year contractor license fees waived.View source
What the source says
If you are an owner and received your Qualifying Party Certificate pursuant to the requirements for expedited licensure as a military service member, the license fees for the initial three-year period are hereby waived.

Not stated in the official sources we checked: Continuing education, Minimum age.

Apprenticeship and code requirements

Supervision ratio
One journeyman overseeing two apprentices on commercial or industrial work; two apprentices on commercial or industrial special systems low-voltage work; three apprentices on residential work.View source
What the source says
The ratio of certified journeyman to apprentices must not exceed: ����������������������������������������������� (a) ���������� one journeyman supervising and overseeing � the work of two apprentices on commercial or industrial work; ����������������������������������������������� (b) ���������� one journeyman supervising and overseeing the work of two apprentices on commercial or industrial special systems low-voltage work; ����������������������������������������������� (c) ���������� one journeyman supervising and overseeing the work of three apprentices on residential work.
Code book
National Electrical Code (NEC)View source
What the source says
This rule adopts by reference the 2020 National Electrical Code (NEC) , as amended by this rule.
Code edition
2020View source
What the source says
This rule adopts by reference the 2020 National Electrical Code (NEC) , as amended by this rule.

Moving with it

Reciprocity states
Alaska, Arkansas, Colorado, Idaho, Montana, Nebraska, Oklahoma, South Dakota, Texas, WyomingView source
What the source says
EE-98J reciprocity is accepted from Alaska, Arkansas, Colorado, Idaho, Montana, Nebraska, Oklahoma, South Dakota, Texas and Wyoming.

Sources

Last checked

  1. 1. https://www.srca.nm.gov/parts/title14/14.006.0003.html
  2. 2. https://www.srca.nm.gov/parts/title14/14.006.0004.html
  3. 3. https://www.rld.nm.gov/construction-industries/find-a-bureau/bureaus/electrical-bureau/
  4. 4. https://www.srca.nm.gov/parts/title14/14.006.0006.html
  5. 5. https://www.srca.nm.gov/parts/title14/14.010.0004.html
  6. 6. https://test-takers.psiexams.com/api/content/bulletin/806
  7. 7. https://public.psiexams.com/pdf/JM%20App%202025.pdf
  8. 8. https://public.psiexams.com/pdf/QP%20App%20MAY%202025.pdf
  9. 9. https://test-takers.psiexams.com/api/content/bulletin/805
  10. 10. https://public.psiexams.com/pdf/Contractor%20App%202025.pdf